Lathes Heavy Duty PK Series 80″- 100″ Swing

MEGABORE LG SERIES
LG Model
Lathes CNC Hollow Spindle LD Series

Description

PK-80 /PK-90 /PK-100 (Model indicates swing in inches over bed).

Can be configured to clients requirements.

BED WIDTH : 1350mm (53.14″). 3 Shear bed.

Lathes heavy duty, PK series

ITEM	UNIT	PKA-80	PKA-90	PKA-100
CAPACITY
Centre height	mm (in.)	1020 (40.15)	1145 (45.07)	1270 (50.00)
Swing over bed	mm (in.)	1300 (51.18)	1550 (61.02)	1800 (70.86)
Swing over cross slide(Long carriage)	mm (in.)	785 (30.90)	1035 (40.74)	1285 (50.59)
Swing over cross slide(Short carriage)	mm (in.)	985 (38.77)	1225 (48.22)	1470 (57.87)
Distance between centres	mm (in.)	3000 (118.11),4000 (157.48), 5000 (196.85), 6000 (236.22),7000 (275.59), 8000 (314.96), 9000 (354.33),10000 (393.70), 11000 (433.07), 12000 (472.44)
BED
Width (W/O auxiliary guide)	mm (in.)	1350 (53.14)
Width (W auxiliary guide)	mm (in.)	1520 (59.84)
CARRIAGE
Cross slide travel(Long carriage)	mm (in.)	1450 (57.08)
Cross slide travel(Short carriage)	mm (in.)	665 (26.18)
Compound tool post travel	mm (in.)	700 (27.55)
4-way tool post width	mm (in.)	350 (13.77)
THREAD FEED RANGE
Longitudinal feed	mm/rev (in.rev)	0.045~2.55 (0.0018~0.1)
Cross feed	mm/rev (in.rev)	0.023~1.28 (0.0009~0.05)
Longitudinal rapid feed	mm/rev (in.rev)	2000 (78.74)
Cross rapid feed	mm/min (in/min)	1270 (50.00)
Metric thread	mm (kinds)	1~56 (60)
Inch thread	TPI (kinds)	1/2~28 (60)
Module thread	MOD (kinds)	0.25~14 (60)
Diamteral pitch thread	DP (kinds)	2~112 (60)
Pitch of leadscrew	mm (TPI)	12 (2)
TAILSTOCK
Quill diameter	mm (in.)	280 (11.02)
Quill travel	mm (in.)	250 (9.84)
Inner taper of quill		MT#7
Bearing surface on the bed ways	mm (in.)	1120 (44.09)
MOTOR
Main spindle motor	KW (HP)	37(50)-STD. 44(60) / 55(75) / 74(100)-OPT
Coolant pump motor	KW (HP)	0.37 (0.5)