Lathes CNC SA Series 40″- 50″ Swing
MEGABORE LG SERIES
LG Model
Lathes CNC Hollow Spindle LD Series
Lathes CNC SA Series 40″- 50″ Swing
Description
The Megabore SA is the flagship of the heavy duty CNC oil country range.
Built to perform under extreme conditions and high horsepower loads.
This machine is used by almost all major oil and hydraulic machine shops.
It offers great cost benefits against the traditional high end machine tool builders.
MEGABORE, SLANT BED CNC LATHE
ITEM |
UNIT |
SA-40 |
SA-45 |
SA-50 |
|
CAPACITY | |||||
Centre height | mm (in.) | 605 (23.81) | 675 (26.57) | 760 (29.92) | |
Swing over bed | mm (in.) | 940 (37) | 1010 (39.76) | 1095 (43.11) | |
Swing over cross slide | mm (in.) | 870 (34.25) | 940 (37) | 1025 (40.35) | |
Distance between centres | mm (in.) | 700 (27), 1200 (47), 1700 (67), 2200 (86) 3200 (126), 4200 (166), 5200 (206) |
|||
BED | |||||
Width / Slant angle | mm (in.) / deg | 1580 (62.20) / 60° | |||
CARRIAGE | |||||
Width of cross slide | mm (in.) | 600 (23.62) | |||
TURRET | |||||
Standard tool post | Polygon Disc / VDI disc | ||||
No. of tool stations | V12 / V8;V12 | ||||
Turning Tool Size | mm (in.) | 32 x 32 (1.25) | |||
Boring Tool Size(max.) | mm (in.) | 63 (2.5) | |||
TRAVEL | |||||
Cross slide(X axis) travel | mm (in.) | 555 (21.85) | |||
Longitudinal(Z axis) travel | mm (in.) | 700 (27), 1200 (47), 1700 (67), 2200 (86) 3200 (126), 4200 (166), 5200 (206) |
|||
Cutting feed rate | mm(in.)/rev | X axis : 0.001~250(0.00004~9.84) ; Z axis : 0.001~400(0.00004~15.75) | |||
Rapid travel | M.(Ft.)/min | X axis : 6(19.68) ; Z axis : 6(19.68) | |||
Ballscrew diameter | mm (in.) | X axis : 50(1.96) ; Z axis : 80(3.14) | |||
TAILSTOCK | |||||
Quill type | Built-in type, Rotating tailstock quill | ||||
Quill diameter | mm (in.) | 235(9.25) | |||
Quill travel | mm (in.) | 200(7.87) | |||
Internal taper of quill | MT#6 | ||||
MOTOR | |||||
Headstock oil refrigerator | 18,000BTU(4,500Kcal) | ||||
Main spindle | KW(HP) | 30/37(40/50)-STD. ; 37.5/45(50/60)-OPT. | |||
Axis servo | KW(HP) | X axis : 7(9.387) ; Z axis : 7(9.387) | |||
Hydraulic tank | KW(HP) | 3.7(5) | |||
Coolant pump | KW(HP) | 1.05(1.4) | |||
Controller | FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT. |
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Specifications are subject to change without notice for improvement