Lathes CNC BN Series 45″ – 60″ Swing
BN Series

CNC

Flat Bed
Lathes CNC BN Series 45″ – 60″ Swing
Description
The BN Series of 2 Shear flat bed CNC lathes with Hydraulic H4 turret
MEGABORE OIL COUNTRY HOLLOW SPINDLE LATHES
MODEL SERIES = SWING OVER BED IN INCHES
BN SERIES Swing over bed | BN-45 1155 mm | BN-50 1275 mm | BN-60 1525 min |
Swing over slide | 720 mm | 040 mm | 1090 rem |
Distance Between centres | 1500 mm to12000 mm in 40″ increments | ||
Spindle Nose | 02 -11 -A2-40 | ||
Spindle Bore | 6″-30″ | ||
Controller | FANUC/FAGOR/SIEMENS | ||
Spindle Motor | Standard 30HP I Optional – 40HP,50HP |
BNC SERIES
Swing over bed |
BNC-60 BNC-70 | BNC-BO 2050 mm |
1550 min 1000 mm | ||
Swing ever cress slide | 1070 mm 1320 mm | 1570 min |
Distance Between centres | 1500 nun to 12000 min in 40″ increment. | |
Spindle Nose | A2 -15 – A2-40 | |
Spindle Bore | 7″-32″ | |
Controller | FANUC/FAGOR/SIEMENS | |
Spindle motor | Standard 30 HP Optional-40HP,50HP |
- Rotating tailstock quill with 285rnrn diameter.
- Motorized tailstock body and quill movement.
- FANUC OFT series complete with manual guide and thread repair. Bed width 715mrn
- Front and rear chip conveyor.
- Auto lubrication system is equipped for headstock, carriage, and cross-slide.Precision tapered roller bearings are equipped on the spindle and the quill.The quill is heat treated and precision ground.Internal taper of quill to suit MT#6 dead or live centre.Turcite B anti friction material is applied on the cross slide and carriage to reduce friction.X & Z axis ballscrews are protected by covers to prevent ingress of swarf /chips and Coolant.
STANDARD FEATURES
One piece bed,floor type casting.








Need a larger machine?
Need a smaller machine?
Request Quote
Get a Quote
Technical Info
BED WIDTH : 715mm (28.14″)
BN series | BN-45 | BN-50 | BN-60 | |
Swing over bed | 1,155mm | 1,275mm | 1,525mm | |
Swing over cross slide | 720mm | 840mm | 1,090mm | |
Distance between centers | 1,500mm~12,000mm in 40″ increments | |||
Spindle nose | A2-11~A2-40 | |||
Spindle bore | 6″~30″ | |||
Spindle motor | Standard-30HP ; Option-40HP,50HP | |||
Controller | FANUC / FAGOR / SIEMENS |